Hydraulic Top Link Cat. 1-1 with Locking Block 18 1/8 26 3/8 with 2 x Hose

  

1 - 1 with locking block 460-670 mm with 2 x hose. The hydraulic top link we offer replaces the existing top link on the tractor and makes your daily work easier.

A double-acting control valve on the tractor is necessary for this - an unbeatable combination in combination with the integrated locking block. When adjusting the upper link, it is very important that the adjusted position is maintained even after a long period of time. This is hardly possible with top links without a locking block, as the tractor's control units do not lock so tightly. This top link is therefore equipped with a locking block.

With this valve, the oil is enclosed in the cylinder by a check valve. Only when there is oil pressure from the tractor again does the valve open and the cylinder can be adjusted. High quality and workmanship and painted. Pulling force: 2.3 to. 2 x hydraulic hose with plug and dust cover.

Connection: 12-L bulkhead size 3 (usual coupling connector), 18-1.5 SW22 nipple + union. Hose designation Blue Flex SAE 100 3/8 R2AT DIN EN 853 2SN DN10 W.